Is it possible to assemble a PAX wardrobe alone
You can certainly assemble a PAX wardrobe alone, but it requires patience and a specific physical layout. In tight New York City apartments, the biggest challenge is not the screws; it is having enough clearance to tilt the unit upright. The PAX frame is often taller than your ceiling, meaning you must assemble it flat on the floor and then lift it. If you have a small room, you might not have the floor space to maneuver the frame safely. When you decide to book furniture assembly with us, we bring the expertise to handle these heavy frames in cramped quarters without damaging your walls or pre-war trim.
Preparation and workspace requirements
Before you start, clear your area. You need a space at least as long as the wardrobe and twice as wide. If you live in a walk-up, get the boxes into the bedroom first. Do not open the boxes in the hallway, as you will just be moving loose panels through tight corners. Check your ceiling height twice before purchasing; if your ceiling is exactly the height of the wardrobe, you cannot stand it up. You must assemble it vertically, which is nearly impossible to do alone without damaging the frame. Protect your floors with cardboard or a blanket, as the heavy side panels can easily scratch hardwood while sliding.
Essential tools for the job
While IKEA provides the basic hex key, you will need a few extra items. A rubber mallet is necessary to snap the cam locks into place without cracking the laminate. A spirit level is vital because NYC floors are rarely level, especially in older brownstones. If you do not have a level, your drawers will eventually slide open or stick. You will also need a stable step ladder to reach the top cam locks. If you are struggling with the basic assembly steps, it is always a smart choice to book a handyman to ensure the frame is square. Keep a magnetic screwdriver handy for the small screws that hold drawer rails, as a loose rail will ruin your storage experience.
Managing the weight of the frame
When you assemble a PAX wardrobe alone, the most dangerous moment is the lift. The frame is heavy and the joints are weak until they are fully locked. Do not attempt to lift a tall unit by yourself if it feels unstable. Always clear the path to the wall where it will sit. If you feel your building is shifting or the floor is too uneven, do not force the frame. Shimming the bottom of the frame is often required in NYC to get the doors to hang straight. For complex installations involving sliding doors or interior lighting, you may also want to book tech setup to handle the electrical components correctly.
Navigating building rules and insurance
Many New York City apartments have strict policies regarding professional service providers. If your building requires a Certificate of Insurance, or COI, you must request this well in advance. Our team understands these requirements and can coordinate with your super or building management to ensure we have the necessary access. Some buildings also restrict work hours to weekdays between 9 AM and 5 PM. Always check your lease or building bylaws before starting a project that involves wall anchoring, as some co-ops prohibit drilling into specific wall types or require board approval for modifications that are permanently attached to the building structure.
Long term maintenance and stability
Maintenance is crucial once your PAX is installed in your NYC home. Because of the city's seasonal humidity changes, materials like particleboard expand and contract. This can lead to screws loosening over time. Every six months, take a screwdriver and check the cam locks on the hinges and drawer slides. If the doors start to rub against each other, use the adjustment screws on the hinges to re-align them. Keeping the unit anchored securely to the wall is your primary safety step. If you ever notice the frame pulling away from the wall, re-secure your anchors immediately. A well-maintained PAX wardrobe can last for years even in the busiest city apartments.
When to stop and call a professional
DIY stops being worth the effort when you risk your safety or your security deposit. If you have to move radiators, cut baseboards, or anchor into metal studs behind lath and plaster, stop. Many NYC condos and co-ops require a certificate of insurance for larger furniture installs. We are fully insured and handle the paperwork so you do not have to worry about building management. Our pro team charges $75 per hour for furniture assembly, which often saves you a full weekend of back-breaking work and potential frustration. If you need help with other parts of your home, remember we also book TV mounting if you need to coordinate your room layout.
Frequently Asked Questions
Do I need a power drill to assemble a PAX wardrobe
You should avoid using a power drill for the main frame because it is easy to strip the holes in the particleboard. Use a manual screwdriver to tighten the cam locks and screws to ensure you do not over-tighten and damage the unit.
How much clearance do I need to stand the wardrobe up
You need a ceiling height at least two inches taller than the unit's height to tilt it upright safely. If your ceiling height is exactly the same as the wardrobe, you will have to assemble it in a vertical position, which requires two people.
Should I anchor the wardrobe to the wall
Yes, you absolutely must anchor the PAX wardrobe to your wall for safety. NYC buildings have various wall types including brick, lath and plaster, or drywall, so make sure you use the appropriate hardware for your specific wall material.
Book help in New York
If you find yourself stuck or simply want the job done perfectly the first time, our professional team is ready to assist. You can book furniture assembly directly through our website to get your PAX wardrobe installed correctly.

