IKEA BESTÅ Assembly: Framing, Doors, and Push-to-Open

BESTÅ Is a Modular System

The IKEA BESTÅ is a modular storage system — frames, doors, legs, and push-to-open mechanisms that combine into a TV bench, a sideboard, or a wall unit. The flexibility is also the complexity. Here's the build.

Assemble the Frames

Each BESTÅ frame is a box with an adjustable shelf and a back panel. Build the frame flat, square it (check diagonals), and nail the back panel. The back panel is structural — without it, a stacked BESTÅ racks.

Connect Multiple Frames

BESTÅ frames connect with through-bolts at the sides. Two frames side-by-side need the included connecting fittings; three frames need them between each pair. A stack without connectors shifts and the door gaps go uneven.

Doors: Hinge or Push-to-Open

BESTÅ doors come hinged or with push-to-open. Hinged doors mount on the included hinges — two per door, adjustable for gap and height. Push-to-open doors use a spring plunger: push the door, it pops open.

Adjusting Hinged Doors

Each BESTÅ hinge has two screws: side (left/right gap) and depth (in/out). Adjust the gap between doors first, then the depth so the door sits flush. A 1mm gap is standard; adjust both doors equally.

Legs or Wall-Mount

BESTÅ can sit on legs (included or sold separately) or wall-mount. Wall-mounting requires studs — the frame and contents are heavy. Use the included anchor and confirm the wall can hold the load.

The TV Bench Height

A BESTÅ TV bench is 16 inches high with standard legs. For a comfortable viewing height, choose taller legs (8-10 inch) to bring the TV center to eye level when seated.

Book a BESTÅ assembly in NYC.